AUDIO-TECHNICA - AT8024 - Stereo/Mono Camera-Mount Microphone

Description

Designed specifically for use with DSLR and other video cameras, the AT8024 delivers dramatically better sound quality than inbuilt camera mics, with a convenient integral shoe mount and rubber shock mount to isolate from vibration and mechanical camera noise.

Features:
- Designed for use with DSLR and other video cameras
- Delivers dramatically better sound quality than the camera’s internal mic
- Selectable line-cardioid mono or mid-side stereo modes
- Three-position adjustable input pad and switchable low-frequency roll-off
- Integral rubber shock mounts for vibration and mechanical noise isolation
- Compact, lightweight design with integral shoe mount
- 3.5mm stereo jack with coiled cable

Specifications:
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Line-cardioid, LR stereo
Frequency Response: 40-15,000 Hz
Open Circuit Sensitivity: –37 dB (14.1 mV) re 1V at 1 Pa
(Mono & LR Stereo)
Impedance: 50 ohms
Maximum Input Sound Level: 128 dB SPL, 1 kHz at 1% T.H.D.
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Switches Mono: M-S Stereo; Three-position input pad; Flat, roll-off
Dynamic Range: Mono: 106 dB, 1 kHz at Max SPL; Stereo: 104 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: Mono: 72 dB, 1 kHz at 1 Pa; Stereo: 70 dB, 1 kHz at 1 Pa
Battery Type: 1.5V AA
Battery Current/Life: 80 hours typical
Weight: 114 g
Dimensions: 172 mm (L) x 82 mm (H) x 30mm (W)
Output Connector: 3.5 mm stereo mini-plug on cable
Cable: Permanently attached 0.2 m -1 m (7.8"- 39.3") coiled cable with right-angle molded 3.5 mm stereo mini-plug at output end
Accessories Included: AT8124 Windscreen; AT8124F Fuzzy windscreen; AA battery