TVLOGIC - 5.5" LCD Field Monitor

Description

The F-5 is a compact and lightweight production monitor, with a 1920 x 1080 Full HD resolution, a nice viewing angle and a maximum luminance of 500 nit.Equipped with a new image processing engine, the F-5A delivers even better sharpness and overprint capability for focus shooters. It also supports various video formats via 3G-SDI and HDMI 1.3 interfaces. And also support professional features such as Waveform / Vectorscope, Focus Assist, 3D LUT Import, Camera Logs and HDR emulation.

The TVLOGIC F-5A displays the level of the built-in sound and the video signal received through the terminal, such as SDI or HDMI. The red and green channels are not used and only the blue or monochrome channel is used to display the signal. 'screen. This function allows you to adjust the color tones (tones and saturation) of the screen using the SMPTE color bar. For example, after displaying the blue channel, adjust the color (or saturation) and hue (or hue) so that the original magenta and cyan have the same brightness and the gray and blue origin are of the same brightness.
The F-5A assigns a color to the pixels at the edge of the image to inform the user of the best focus. With this function, the user can easily differentiate the focused area from the focused area, especially when shooting with shallow depth of field.
Check the blanking area and synchronize the signals by displaying the horizontal and vertical intervals in the center of the screen.
Flip the displayed image horizontally or vertically. This feature offers flexible editing options for camera operators.The F-5A displays the Luma (Y ') level of the color input image. Each pixel of Y 'has been analyzed and replaced by a specific zebra color or pattern according to the index on the right of the screen. Different types of on-screen image formats are available. A wide range of markers and safety zones with a selection of line color and curtain transparency, a user marker is available if any of the standard markers meets your needs. The monitor checks the information of the luma (Y ') and chroma (C') of the input signal, and if the input signal exceeds the designated minimum and maximum value, the pixel should flash. This feature helps the user to easily identify unwanted signal levels and to obtain a better exposure setting. timecode information is displayed on the screen. The width / height display ratio adjusts. Amplification of the input signal from 0% to 90%.Apply LUTs to the outbound log signal. A LUT for all major camera manufacturers has been included (LOG-C, C-LOG, S-LOG 1,2,3 and RED Gamma 3,4).
The ALEXA ARRI metadata is routed through the SDI outputs of the camera and displayed on the monitor. It is possible to sequentially zoom to the specified area.
Several formats and resolutions that are perfectly suited to anamorphic lens and image formats are supported. When shooting anamorphic, the image you are watching is a "snug" preview of what is being recorded.
Sleep mode sets the LUMINANCE to the minimum value when the time set in the still image output is exceeded.It is also possible to load your 3D-LUT creation files into NLE software such as Davinci Resolve by USB flash memory and display your LUT on VFM-055A or F-7H. Once the LUTs are synchronized on the monitor, you can easily modify them in production.